Technical information

  • 2+
  • 6,27 x 5,72 x 2 m
  • 9,3x9,3m
  • 33
  • 1m

Description

  • The coloured panels are made with a compact material 13mm thick. It is made up of 70% of softwood fibres and 30% of thermosetting resin, and it stands up to weathering very well (sun, rain, damp, etc.). The coloured surfaces are treated with products based on coloured acrylic polyurethane resins; this enables them to stand up well to UV radiation and resist damage.
  • The platforms and the climbing walls are made from a 12.5mm thick, textured, non-slip compact material (HPL).
  • The 95mm square posts and the 125mm diameter posts are made of painted steel, ensuring robustness and durability.
  • The roof is made of polyethylene plates 10mm thick.
  • The tubes are made of stainless steel, diameter 40mm, thickness 2mm, ensuring robustness and durability.
  • The ropes are made of galvanised steel cable covered with multifilament polypropylene. The cables are held in place and linked by injected polyamide spheres.
  • The horizontal beam of the swing is made of non-painted galvanised steel (Ø 88.9mm). The swing bearings are made of stainless steel.
  • The swing seats are made of shock absorbing moulded honeycomb rubber. The swing chains are made of galvanised steel. The seat fixing bracket is made of 10mm stainless steel wire.
  • The slide slope is made of 304 stainless steel 2mm thick, shaped, bent and rolled in one piece.
  • The climbing holds are made of polypropylene. They are non-toxic, non-flammable and shock and UV resistant.
  • The stainless steel fixings are protected by polyamide anti-vandalism caps.

 

Add to Requests